the mechanical parts machining methods
Machining of the main method of turning, milling, cutting, grinding, the traditional machining methods are: turning, clamp, milling, planing, interpolation, grinding, drilling, boring, punching, sawing and other methods. Now even include electroplating, wire cutting, casting, forging, galvanic corrosion, powder processing and more.
Turning: The main processing axis or rotary body parts, lathe turning to reach its due shape;
Milling: The main processing plane, or bevel, milling plane by removing the plane;
Planing: The main processing plane or curved surface, remove the plane or curved surface by planing knife;
Grinding: Mainly through the grinding wheel grinding surface, cylindrical, inner circle so that it reaches the surface roughness;
Drilling: drilled mainly through the drill hole to drill;
Boring: mainly through the boring knife or boring hole.
Stamping: mainly by stamping press forming;
Sawing: mainly through sawing cutting.
If the product bulk, it is recommended to use lathe boring, fast and accurate. Because it is clear angle, so boring knife also pay attention to the front corner.
If the product is small, the use of milling cutter but slower. Machining is the process of changing the form factor or performance of a workpiece with a machining machine. According to the temperature of the workpiece being processed state, divided into cold and hot processing. Generally at room temperature processing, and does not cause chemical or physical changes in the workpiece, said cold processing. Generally higher than or lower than the state of the state of the processing, will cause the workpiece chemical or physical changes, said thermal processing. Cold processing by processing differences can be divided into cutting and pressure processing. Common thermal processing heat treatment, calcined, casting and welding.
BY NICOLE
Shenzhen Noble smart manufacturing technology Co., Ltd.
More than 10 years of experience in CNC machining.